• Home
  • /
  • Meinecke Mechanical Turbine Water Meters Buy from Cross

Shop Meinecke Mechanical Turbine Water Meters on ShopCross

Available in ANSI/DIN 150 LB flanges in sizes from 1-1/2 inch to 12 inch, Meinecke meters can be outfitted with a mechanical totalizer or connected to a frequency to current converter to provide a 4-20 mA signal output. Meinecke also manufactures the BMF series of meters in sizes from 2 inch to 8 inch for light caustic service. 

MEINECKE WP/Dynamic Series Flow Meters are ANSI Flanged Mechanical Totalizing Turbine Woltman Water Meter style. They are available in sizes ranging from 1-1/2" to 12", in both Cold (<122°F) and Hot (<266°F) water versions.

Meinecke introduced the WP/Dynamic Series Turbine Meters in 2001. Like it's predecessor, the WP/Dynamic Series Turbine meters offers a simple, time tested method flow measurement, but at the same time, one that's been updated with state of the art technology.

– Measuring ranges have been extended, with required minimum flows at unheard of lows when compared to typical turbine type water meters.
– Reaction times have been improved and durability has been maximized.
– Reconfigured pulser ports for both reed and opto style pulsers allow for easier installation in both new and retrofit applications. Pulsers simply plug into the register head rather than under the register as was common on the WP-QF series. No tools or special skills are required. There are a total of three ports, two REED and one OPTO.
– Standard Process Connections are ANSI 150lb R.F. Flanges.– Register Options include US Gallons and Cubic Meters.

We typically stock all sizes of the Cold Water Meters from 1-1/2" to 12". Need a water meter on site in 24 hours? Call us! We even stock 8", 10" and 12" cold water meters.

Mechanical, Non-Resettable Totalizing Register

Available in US Gallons and Cubic Meters, the improved design of the hermetically sealed register has resulted in a major improvement in its ability to keep out moisture and dirt. It can be rotated in any direction without affecting the meter reading or calibration seal and the register face has been redesigned to make it easier to read in poor lighting conditions. 

Maintenance and Repairs

Meinecke's flanged propeller meters consist of two parts, the flanged body and the Internal Measuring Unit (IMU). The IMU is a modular part consisting of the propeller assembly, register and the transmission/counting mechanism. Removal of the measuring element for cleaning, maintenance and/or replacement is a simple procedure and can be accomplished without removing the meter from the line. Spares IMU's for Cold Water meters in sizes ranging from 1-1/2" to 6" are typically available from stock. 8 inch to 12 inch Cold Water IMU's all Hot Water sizes are special order products with 4-5 week lead-time.